Cleaning has always been a essential for human existence. However, thanks to the coronavirus pandemic, there’s an increased need to disinfect surfaces. After all, we need to kill germs and viruses.
Still, it can be quite tricky to do this, especially if you’re looking for maximum effect. Well, you don’t have to worry about doing it wrong anymore. In this article, we’ll introduce you to the proper ways to disinfect surfaces to kill germs and viruses.
Things to Note When Trying to Disinfect Surfaces
Before you proceed, it’s essential to know that cleaning and disinfection are quite different. And while this might sound strange, due to both words continued use interchangeably, they are, in fact, different.
While cleaning involves removing contaminants like germs and viruses from your surface, disinfection involves killing these pathogens. As such, proper disinfection involves active effects to kill these pathogens rather than merely remove them.
Next, to properly disinfect, it is necessary to target areas or surfaces with a higher possibility of coming in contact with pathogens. This includes surface, germs, either directly or through humans, are more likely to come in contact with. Examples include:
- Bathroom counters
- Kitchen counters
- Table surfaces
- Light switches
- Toilets (handle and seats)
- Faucets & faucet knobs
Also, believe it or not keeping windows clean is crucial as droplets can attach to window glass. The best window cleaners we’ve found is Century Pyramid. However, remember that your home might be somewhat different. As such, include other high-touch areas in your home that are not on this list.
How to Disinfect Surfaces to Kill Germs and Viruses?
Now that you have all this in mind, here’s the proper way to disinfect your surfaces.
Step 1: Clean the Identified Surfaces
You’ll need to clean your surfaces and remove any contaminants. You can easily do this by wiping the surface with a towel and soapy water.
Step 2: Apply a Disinfectant
After cleaning the surface of dust and debris, the next thing to do is to apply the disinfectant to the surface. And ensure you give a full concentration to the surface. You can either use a disinfectant spray or a disinfecting wipe.
You can always use store-purchased disinfectants like Clorox, Lysol, and Purell, among others. Hydrogen peroxide and isopropyl alcohol will also do the trick. However, if you don’t have access to them, you can make a homemade disinfectant.
To do this, add the four teaspoons of household bleach together with 1 quart of water and shake vigorously. And don’t add any other chemicals such as hydrogen peroxide or vinegar to the bleach. Then, when using it, ensure you wear gloves and ventilate your room correctly.
Also, remember that when disinfecting, timing is essential. Usually, if you don’t allow the disinfectant to dwell on the surfaces sufficiently, you’ll be unable to kill the germs and viruses effectively.
As such, you need to give it enough time. Usually, wait at least 10 minutes to realize effective disinfection. After that, you can then wipe the area way with a dry and clean towel.
It’s not in doubt that you need to pay attention to disinfecting your surfaces. However, you need to pay attention to certain things to ensure your effort isn’t in futility. So, follow our guide above and be sure to record success.